Polymeric adhesives may outgas carbon dioxide, which can affect laser power and add distortion.
If you have a laser application, and your device is experiencing reduced power, your product may have carbon dioxide contamination issue. The Hi-Rel provides a number of solutions to help prevent carbon dioxide contamination as detailed below. If you have a unique application, let us know – we’re ready to help develop the right solution for your circumstance.
| Offering | Form factor | H₂ | H₂O | CO₂ | O₂ | Organics | Activation | Temp max | Absorption rate | Capacity |
|---|
| HR1 Series | Pd metal foil (0.002" / 0.004") | ✓ | — | — | — | — | No | 500°C (operating) | 455 ppm/in²/min (H₂) | 20 cc/cc (H₂) |
| HGI Series | Dispensed/printed on lid/coupon | ✓ | ✓ | ✓ | — | ✓ | 4hrs at 100°C | 120°C (processing) | — | — |
| HTI Series | Dispensed/printed on lid/coupon | ✓ | ✓ | ✓ | — | ✓ | 4hrs at 100°C | 320°C (processing) | — | — |
| HTA Series | Tablet | ✓ | ✓ | ✓ | — | ✓ | Optional (pre-activated) | 400°C (effective) | — | — |
| CP Series | Tablet | ✓ | ✓ | ✓ | — | ✓ | Required (normally) | 500°C (processing/storage) | — | — |
| CP Vacuum Series | Tablet | ✓ | ✓ | ✓ | ✓ | ✓ | Activate during pump down (250°C) | NS | — | — |